Installing Your Mysa Smart Thermostat for Electric Baseboard

What You'll Need

• Mysa Smart Thermostat for Electric Baseboard Heaters
• Mysa app (iOS or Android)
• Wi-Fi network
• High-voltage electric baseboard heater (120V-240V)
• Electrical experience recommended

Step-by-Step Setup

1. Turn off power at circuit breaker (high voltage!)
2. Verify power is off with voltage tester
3. Remove old thermostat:
   • Note line and load wire connections
4. Install Mysa:
   • Connect line wires to LINE terminals
   • Connect load wires to LOAD terminals
   • Ground wire to ground terminal
5. Mount to wall box
6. Restore power
7. Download Mysa app and add device
8. Connect to Wi-Fi and configure

Key Features

• Designed for high-voltage electric baseboard heaters
• Works with Alexa, Google, Apple HomeKit
• Energy monitoring and reports
• Scheduling and geofencing
• Zone control for multi-room setups
• Sleek touchscreen design

Troubleshooting

• IMPORTANT: High-voltage installation - consider hiring electrician
• No power: Verify line/load connections are correct
• Heater not turning on: Check load wire connections
• Factory reset: Via Mysa app settings