Installing Your Sonoff TX Ultimate Smart Touch Switch

What You'll Need

• Sonoff TX Ultimate Smart Touch Switch
• Screwdriver
• Wire strippers
• Voltage tester
• Smartphone with eWeLink app
• 2.4GHz WiFi network

Step-by-Step Setup

1. Turn off power: Switch off circuit breaker.
2. Remove existing switch: Unscrew and disconnect wires.
3. Wire the TX Ultimate: Connect Live (L), Neutral (N), and Load (L1/L2/L3) wires per diagram.
4. Mount switch: Secure in wall box.
5. Attach front panel: Snap the touch panel into place.
6. Restore power: Turn breaker back on.
7. Download eWeLink app: Install and create account.
8. Add device: Tap "+", select TX Ultimate, and follow pairing prompts.
9. Configure touch gestures: Set up swipe and tap actions in app.

Key Features

• Full touch panel - tap or swipe anywhere
• RGB LED light bar effects
• Built-in speaker for feedback sounds
• Gesture controls (swipe up/down/left/right)
• Works with Alexa, Google, IFTTT
• Scene triggers via gestures
• 1, 2, 3, or 4 gang options
• Elegant edge-to-edge design

Troubleshooting

• Touch not responding: Clean panel surface. Check firmware is updated.
• Gestures triggering wrong action: Reconfigure gesture mappings in eWeLink app.
• LED bar issues: Adjust LED settings or disable in app if distracting.
• WiFi connection lost: Ensure 2.4GHz network. Reset by holding any touch zone 5+ seconds.