Skip to main content
What You'll Need
- SwitchBot Lock Pro
- CR123A batteries x2 (included) or rechargeable battery pack
- Smartphone with SwitchBot app (v9.17 or newer)
- SwitchBot Hub 2/Hub Mini for remote access and Matter (optional)
Step-by-Step Setup
- Download SwitchBot app: Install latest version and sign in.
- Check compatibility: Lock Pro fits most thumb-turn deadbolts. Review the compatibility guide.
- Clean the surface: Thoroughly clean interior door where lock mounts.
- Select mounting bracket: Use Bracket A for ≥3mm cylinder overhang, Bracket B for <3mm.
- Attach bracket: Apply the 3M adhesive bracket or use screw mounting for extra security.
- Remove battery tab: Pull the isolation tab from the Lock Pro to power on.
- Mount Lock Pro: Blue LED will flash. Attach the lock body to the bracket.
- Pair in app: Tap +, select Lock Pro, and complete Bluetooth pairing.
- Calibrate positions: Follow the app to set locked/unlocked positions.
- Install door magnet: Attach the included magnet on the door frame to detect open/closed status.
- Set up Matter (optional): With Hub 2, enable Matter for Apple Home/Google Home integration.
Key Features
- Quick-release design - easy battery replacement
- Dual-lock support - control two locks together
- Matter compatible (with Hub 2)
- Works with Apple Home, Google Home, Alexa
- NFC unlock with SwitchBot Card
- Auto-lock and alert features
- Door sensor included
- Rechargeable battery option available
Troubleshooting
- Matter setup failing: Ensure Hub 2 firmware is updated. Use app v9.17+.
- Lock not detected: Check battery installation. Blue LED should flash on power-up.
- Door magnet not working: Reposition magnet closer to the lock. Check alignment.
- Dual-lock sync issues: Ensure both locks are calibrated and within Bluetooth range.