Installing Your Treatlife Smart Dimmer Switch

What You'll Need

• Treatlife Smart Dimmer Switch
• Phillips head screwdriver
• Wire strippers
• Voltage tester
• Smartphone with Smart Life or Treatlife app
• 2.4GHz WiFi network
• Neutral wire required

Step-by-Step Setup

1. Turn off power: Switch off circuit breaker. Double-check with voltage tester.
2. Remove existing switch: Unscrew wall plate and disconnect all wires.
3. Identify wires: Locate Line (hot), Load (to light), Neutral, and Ground.
4. Wire the dimmer: Connect Line to L, Load to Load terminal, Neutral to N, Ground to Ground.
5. Mount dimmer: Secure in wall box and attach wall plate.
6. Restore power: Turn breaker on. LED will flash rapidly.
7. Download app: Install Smart Life or Treatlife app.
8. Add device: Tap "+" and select dimmer switch. Follow WiFi setup.
9. Configure settings: Adjust minimum brightness and fade speed if needed.

Key Features

• Built-in WiFi - no hub required
• Works with Alexa and Google Assistant
• Smooth dimming 1-100%
• Scheduling and timers
• Scene support for multiple devices
• Single-pole installation
• LED status indicator
• Budget-friendly option

Troubleshooting

• LED flashing rapidly: Pairing mode - complete setup in app.
• Won't connect: Ensure 2.4GHz WiFi only. 5GHz not supported.
• Lights flickering: Increase minimum brightness setting. Check bulb compatibility.
• Reset device: Turn switch off/on 3 times quickly to enter pairing mode.