Installing Your Wyze Switch

Intermediate 20-30 minutes

What You'll Need

  • Wyze Switch
  • Phillips head screwdriver
  • Wire strippers
  • Voltage tester
  • Smartphone with Wyze app
  • 2.4GHz WiFi network
  • Neutral wire required

Step-by-Step Setup

  1. Download Wyze app: Install and sign in to your account.
  2. Turn off power: Switch off circuit breaker for the switch.
  3. Remove existing switch: Unscrew wall plate and disconnect wires.
  4. Verify single-pole: Wyze Switch only works with single-pole setups (one switch controls the light).
  5. Wire the switch: Connect Line (black/hot), Load (to light), Neutral (white bundle), and Ground (green/bare).
  6. Mount switch: Secure in wall box and attach wall plate.
  7. Restore power: Turn breaker on.
  8. Add in Wyze app: Tap "+" > Power & Lighting > Wyze Switch.
  9. Connect to WiFi: Follow prompts to connect to your 2.4GHz network.

Key Features

  • Two control modes: Classic (standard) and Smart Bulb (keeps power on for smart bulbs)
  • Multi-tap actions - control other Wyze devices with taps
  • Works with Alexa and Google Assistant
  • Scheduling and vacation mode
  • Auto-reconnect after power loss
  • Built-in WiFi - no hub required
  • Affordable smart switch option
  • Wyze ecosystem integration

Troubleshooting

  • Not compatible error: Wyze Switch is single-pole only. Not for 3-way setups.
  • No neutral wire: Neutral is required. Check for bundled white wires in box.
  • Won't connect to WiFi: Ensure 2.4GHz network. Reset by holding button 10 seconds.
  • Smart bulb mode: Use this if controlling Wyze Bulbs to keep them powered.