Installing Your Zooz ZEN72 Z-Wave Plus 700 Dimmer

What You'll Need

• Zooz ZEN72 Z-Wave Plus 700 Dimmer
• Phillips head screwdriver
• Wire strippers
• Voltage tester
• Z-Wave hub
• Neutral wire required

Step-by-Step Setup

1. Turn off power: Switch off circuit breaker.
2. Remove existing switch: Unscrew and disconnect wires.
3. Wire the dimmer: Connect Line, Load, Neutral, and Ground to terminals.
4. Mount dimmer: Secure in wall box.
5. Attach wall plate: Install toggle-style wall plate.
6. Restore power: Turn breaker back on.
7. Include in hub: Tap paddle up 3 times to start inclusion.
8. Configure: Adjust dim levels, ramp rates, and LED in hub.

Key Features

• Toggle-style paddle design
• Z-Wave Plus 700 series
• 100W LED or 300W incandescent
• Simple 3-way with mechanical switches
• Scene control support
• Adjustable LED indicator
• S2 security authentication
• SmartStart ready

Troubleshooting

• Toggle vs paddle: ZEN72 is toggle style. ZEN77 is paddle/rocker style.
• Dimming issues: Ensure bulbs are dimmable LEDs. Adjust min/max levels.
• Range problems: Add Z-Wave repeaters to strengthen mesh.
• 3-way wiring: Must be at location with direct line connection.