How to Set Up the Aqara Presence Sensor FP300

What You'll Need

• Aqara Presence Sensor FP300
• Aqara Zigbee hub (M2, M3, or compatible)
• USB-C power cable
• Aqara Home app

Step-by-Step Setup

1. Ensure hub is set up: The FP300 requires an Aqara Zigbee hub.
2. Choose mounting location: Corner or wall mount with view of the room.
3. Connect power: Use USB-C to power the FP300.
4. Open Aqara Home app: Navigate to devices.
5. Add device: Tap "+" and select "Presence Sensor FP300."
6. Put in pairing mode: Press and hold the button until LED blinks.
7. Wait for connection: Sensor pairs via Zigbee or Thread.
8. Mount permanently: Secure using included hardware.
9. Configure zones: Set up detection zones in the app.
10. Test detection: Verify presence detection in each zone.
11. Create automations: Link to lights, HVAC, or other devices.

Key Features

• mmWave radar with zone detection
• Thread + Zigbee 3.0 connectivity
• Breathing and heartbeat detection
• Multi-person tracking
• Sleep monitoring capability
• Matter compatible (via hub)
• HomeKit, Alexa, Google support

Troubleshooting

• Not pairing: Bring closer to hub. Hold button 10 seconds to reset.
• Inconsistent detection: Adjust mounting angle. Check for interference sources.
• Sleep tracking inaccurate: Position with clear view of bed at proper angle.
• Thread not connecting: Ensure Thread border router is active on network.