What You'll Need
- Sonoff SNZB-06P
- Zigbee hub (Sonoff Zigbee Bridge Pro, or compatible)
- eWeLink app
- USB-C power cable
Step-by-Step Setup
- Ensure hub is set up: The SNZB-06P requires a Zigbee hub.
- Connect power: Plug USB-C cable into the sensor.
- Open eWeLink app: Navigate to devices.
- Add device: Tap "+" and select "Add Zigbee Device."
- Put sensor in pairing mode: Press and hold the button for 5 seconds.
- Wait for connection: Sensor will pair via Zigbee.
- Name the sensor: Give it a room-based name.
- Mount the sensor: Position on wall or ceiling with view of the room.
- Adjust settings: Configure detection sensitivity and hold time.
- Create automations: Set up scenes based on presence.
Key Features
- 5.8GHz mmWave radar detection
- Detects stationary and moving presence
- Zigbee 3.0 connectivity
- No battery—USB-C powered
- Adjustable sensitivity
- Works with Alexa and Google Home
- Budget-friendly price point
Troubleshooting
- Not pairing: Reset by holding button 10 seconds. Bring closer to hub.
- False presence: Adjust sensitivity lower. Mark interference zones.
- Slow response: Check Zigbee network strength. Add repeaters if needed.
- Not detecting: Verify sensor has power (LED). Check mounting angle.
Was this guide helpful?