How to Set Up the Dreame X40 Master Ultra

What You'll Need

• Dreame X40 Master Ultra
• Auto-Maintenance Base Station
• Dreamehome app
• 2.4GHz WiFi network

Step-by-Step Setup

1. Position base station: Place against wall with 0.5m side clearance and 1.5m front clearance.
2. Fill clean water tank: Remove, fill with clean water, and reinsert.
3. Empty dirty water tank: Ensure dirty tank is empty.
4. Add cleaning solution (optional): Pour Dreame cleaning solution into designated compartment.
5. Connect power: Plug in the base station.
6. Prepare robot: Remove all packaging and protective films.
7. Attach mop pads: Secure mop pads to the MopExtend assembly.
8. Dock robot: Place on base station to charge and initialize.
9. Download Dreamehome app: Install from app store.
10. Create account: Register or log in.
11. Add device: Tap "+" and select X40 Master Ultra.
12. Connect WiFi: Enter your 2.4GHz network credentials.
13. Create map: Run an initial cleaning to generate your floor plan.
14. Customize settings: Edit rooms, set suction levels, and configure mop settings per area.

Key Features

• 12,000Pa suction
• Extending/lifting side brush (22mm)
• MopExtend for edge cleaning
• 70°C hot water mop washing
• Auto-empty dustbin
• 22mm obstacle clearance
• AI-powered navigation

Troubleshooting

• Side brush not extending: Ensure no debris blocking mechanism. Update firmware.
• Mop not reaching edges: Enable MopExtend feature in settings.
• Navigation errors: Clean all sensors. Remove highly reflective objects from floor.
• Base station errors: Check water tanks are properly seated. Clean debris from dock area.