What You'll Need
- Roborock Saros 10R
- Multifunctional Dock
- Roborock app
- 2.4GHz WiFi network
Step-by-Step Setup
- Position dock: Place against a wall with 0.5m clearance on sides and 1.5m in front.
- Fill clean water tank: Remove and fill the clean water reservoir.
- Check dirty water tank: Ensure the dirty water tank is empty and properly seated.
- Plug in dock: Connect power. Status lights will illuminate.
- Remove packaging: Take off any protective film or foam from the robot.
- Attach mop pads: Secure the mop pads to the robot's mopping assembly.
- Dock the robot: Place on the charging station. It will announce when connected.
- Download Roborock app: Install from your app store.
- Create/login to account: Sign up or sign in.
- Add device: Tap "+" and select Saros 10R. Follow pairing steps.
- Connect WiFi: Enter your 2.4GHz network details.
- Start mapping clean: Send robot to clean and build your home map.
- Customize map: Edit rooms, add no-mop zones, set furniture locations.
Key Features
- 22,000Pa suction power
- RetractSense navigation
- StarSight 3D scanning
- VibraRise 4.0 sonic mopping
- Auto-empty (2.7L dustbin)
- Hot water mop washing + hot air drying
- Matter compatible
Troubleshooting
- Robot not docking: Clean dock charging contacts. Ensure clear path to dock.
- Mop pads not cleaning well: Replace pads or run hot water wash cycle.
- Navigation errors: Clean LiDAR sensor on top. Remove reflective obstacles.
- App connectivity issues: Ensure robot and phone are on same network.
Was this guide helpful?