Skip to main content
What You'll Need
- Airthings View Plus
- Smartphone with Airthings app
- 2.4GHz Wi-Fi network
- USB power adapter (optional for hub functionality)
- Batteries (included for portable use)
Step-by-Step Setup
- Download Airthings App: Install the Airthings app from the App Store or Google Play and create an account.
- Remove Battery Tab: Pull the battery tab to activate the device. The display will turn on.
- Add Device in App: Open the app and tap (+) to add a new device. Select View Plus from the device list.
- Connect via Bluetooth: Hold your phone near the View Plus. The app will discover and connect to the device.
- Connect to Wi-Fi: Select your 2.4GHz Wi-Fi network and enter the password. The View Plus will connect.
- Name and Place: Give your device a name and assign it to a room in your home.
- Enable Hub Mode (Optional): For continuous cloud connectivity, connect the USB power cable. This also enables SmartLink hub functionality.
- Wait for Calibration: Radon readings require up to 7 days for initial calibration.
Key Features
- Monitors 7 air quality factors including radon
- Color-coded E-ink display with wave gesture control
- Built-in SmartLink hub when USB-powered
- Can connect up to 7 Wi-Fi networks
- Long-term data storage and historical trends
- Integrates with Alexa and Google Assistant
Troubleshooting
- Wi-Fi won't connect: Ensure you're using 2.4GHz network. The device doesn't support 5GHz-only networks.
- Bluetooth pairing fails: Ensure Bluetooth is enabled on your phone and the device is nearby.
- Radon reading shows dashes: Radon calibration takes up to 7 days. Be patient during initial setup.
- Hub mode not working: Ensure the device is connected via USB power, not just running on batteries.
- Factory reset: Hold the back button for 10 seconds until the display shows reset confirmation.