How to Set Up Your Aqara Wireless Mini Switch

Beginner 5-10 minutes

What You'll Need

  • Aqara Wireless Mini Switch
  • Aqara Hub (M1S, M2, E1, or compatible hub)
  • Aqara Home app (iOS/Android)
  • Aqara account
  • CR2032 battery (included)

Step-by-Step Setup

  1. Prepare the switch: Remove the battery insulation tab if present
  2. Open Aqara Home app: Make sure your hub is online
  3. Add accessory: Tap "+" → "Add Accessory" → "Wireless Mini Switch"
  4. Enter pairing mode: Press and hold the button for 5+ seconds until LED flashes
  5. Wait for pairing: The switch will appear in the app
  6. Configure actions: Set up what happens on single press, double press, and long press
  7. Test all actions: Try each gesture to verify configuration

Key Features

  • 3 gesture types: Single press, double press, long press
  • Compact design: Small button you can place anywhere
  • HomeKit support: Works with Apple Home (via compatible hub)
  • Scene triggers: Use to trigger scenes and automations
  • Zigbee protocol: Reliable, low-power connectivity
  • Long battery: CR2032 lasts about 2 years

Troubleshooting

  • LED won't flash: Battery may be dead or inserted wrong. Check orientation
  • Pairing times out: Move closer to hub. Ensure hub is in pairing mode
  • Actions not triggering: Check automation setup in app. Verify hub is online
  • Double press not registering: Press quickly - timing window is short
  • Factory reset: Press and hold button for 10+ seconds until LED flashes rapidly