How to Set Up Your Crestron TSW-770 Touch Screen

Advanced 10-15 minutes

What You'll Need

Crestron TSW-770 7" Touch Screen
Crestron control processor (required)
Crestron Toolbox software
Network infrastructure
Professional installer (recommended)

Step-by-Step Setup

Professional installation: Crestron requires certified installation
Mount touchscreen: Wall mount or use table stand
Connect power: PoE (Power over Ethernet) or local power
Network connection: Connect to Crestron network
Configure in Toolbox: Set IP address and project settings
Load programming: Upload custom interface from processor
Calibrate touch: Run touch calibration if needed
Test all functions: Verify all controls work properly

Key Features

7" HD display: Professional-grade touchscreen
Custom interfaces: Fully programmable UI
Enterprise-grade: Designed for commercial/high-end residential
Multi-room control: Lights, shades, AV, climate
Scheduling: Built-in event scheduling
Reliability: Commercial-grade durability

Troubleshooting

Professional system: Contact Crestron dealer for support
Not connecting: Verify network settings and processor communication
Interface issues: May need program update from integrator
Touch calibration: Access via system settings
Firmware updates: Managed through Crestron Toolbox