How to Set Up Your Fibaro Door/Window Sensor 2

Intermediate 10-15 minutes

What You'll Need

  • Fibaro Door/Window Sensor 2
  • Z-Wave hub (SmartThings, Hubitat, Home Assistant, Fibaro HC3)
  • Z-Wave network configured
  • ER14250 battery (included)

Step-by-Step Setup

  1. Open the sensor: Slide or twist to open casing
  2. Insert battery: Install the ER14250 battery
  3. Put hub in inclusion mode: Start Z-Wave pairing
  4. Include sensor: Press the TMP button 3 times quickly
  5. Wait for inclusion: Hub will add the sensor
  6. Configure parameters: Adjust LED, tamper sensitivity, etc.
  7. Mount: Attach sensor to frame, magnet to door/window
  8. Test: Open and close to verify

Key Features

  • Ultra-slim design: Smallest Fibaro sensor yet
  • Open/close detection: Reliable magnetic reed switch
  • Temperature sensor: Built-in temperature monitoring
  • Tamper protection: Alerts if sensor is removed
  • LED indicator: Customizable color and brightness
  • Z-Wave Plus: Extended range and reliability

Troubleshooting

  • Won't include: Exclude first if previously paired
  • LED too bright: Adjust via Z-Wave parameter 2
  • Temperature offset: Calibrate via parameter 52
  • Tamper too sensitive: Adjust parameter 30
  • Factory reset: Hold TMP button for 15+ seconds