How to Set Up Your Meross Matter Smart Power Strip

What You'll Need

• Meross Matter Smart Power Strip
• Available wall outlet
• Matter-compatible controller
• Smartphone with Meross app or controller app
• 2.4GHz Wi-Fi network

Step-by-Step Setup

1. Position the power strip: Place where you'll use it. Ensure adequate space for plugging in devices.
2. Plug into wall: Connect the power strip to a wall outlet. The LED will indicate power.
3. Enter pairing mode: Press and hold the power button until the LED blinks rapidly.
4. Open Matter controller: Apple Home, Google Home, or SmartThings.
5. Add device: Tap "+" and scan the Matter QR code on the power strip.
6. Wait for connection: The strip will connect to your Wi-Fi.
7. Configure outlets: Each outlet appears as a separate controllable device. Name them individually.
8. Assign rooms: You can place different outlets in different "rooms" for organization.
9. Set up USB ports: USB ports may be controlled together or separately depending on model.

Key Features

• Matter-certified
• Multiple individually controlled outlets
• USB ports for charging
• Surge protection
• Energy monitoring per outlet
• Works with Apple Home, Google Home, Alexa, SmartThings
• Scheduling per outlet
• Physical buttons for manual control

Troubleshooting

• Not all outlets appearing: Wait for full pairing to complete. Each outlet is added as a separate device. Re-pair if some are missing.
• Pairing fails: Ensure the strip is in pairing mode (rapid blinking). Use 2.4GHz Wi-Fi only. Factory reset if needed.
• Surge protection tripped: Unplug all devices. Reset the strip. Avoid overloading with high-wattage devices.
• USB not controlled independently: Some models control USB ports together. Check documentation for your specific model.
• Energy data inaccurate: Calibrate or compare with a known load. Update firmware via Meross app.