How to Set Up Your Meross Smart Garage Door Opener

What You'll Need

• Meross Smart Garage Door Opener
• Meross app (iOS/Android)
• 2.4GHz Wi-Fi network
• Meross account
• Existing garage door opener with wall button

Step-by-Step Setup

1. Install the controller: Mount near your garage door opener
2. Wire to opener: Connect to wall button terminals on your opener
3. Install door sensor: Mount magnetic sensor on garage door and frame
4. Connect power: Plug in the USB power adapter
5. Download Meross app: Create account or log in
6. Add device: Tap "+" → "Garage Door Opener"
7. Enter pairing mode: Hold button until LED flashes
8. Connect Wi-Fi: Enter your network credentials
9. Test operation: Open and close door via app

Key Features

• HomeKit native: Works directly with Apple Home
• Remote control: Open/close from anywhere
• Door status: Real-time open/close status
• Multiple assistants: Works with Siri, Alexa, Google
• Notifications: Alerts when door opens/closes
• No subscription: All features included, no monthly fee

Troubleshooting

• Door doesn't respond: Check wiring to opener terminals
• Status always wrong: Reposition door sensor magnet alignment
• HomeKit pairing fails: Reset device and pair via Meross app first
• Wi-Fi disconnects: Check signal strength in garage
• Factory reset: Hold button 10+ seconds