What You'll Need
- Sengled Smart LED Bulb A19 Color
- Compatible Zigbee hub (SmartThings, Sengled Hub, Echo with Zigbee)
- E26 light socket
- Smartphone with hub's app
Step-by-Step Setup
- Keep Bulb Off: Don't install the bulb until the app prompts you.
- Open Hub App: Launch SmartThings, Sengled Home, or Alexa app.
- Add Device: Navigate to add new device > Light > Sengled.
- Start Pairing: Put hub in pairing mode.
- Install Bulb: Screw bulb into socket and turn on power when prompted.
- Wait for Discovery: The bulb will be found within 3 minutes (pairing window).
- Name and Assign: Give the bulb a name and assign to a room.
- Test Features: Try changing colors and brightness in the app.
Key Features
- 16 million colors plus tunable white
- Zigbee protocol - requires compatible hub
- 800 lumens (60W equivalent)
- Works with SmartThings, Alexa Echo Plus/Studio, Sengled Hub
- No Wi-Fi congestion - uses Zigbee mesh
- Scheduling and automation
- Group control
Troubleshooting
- Bulb not found: Reset by turning on/off 10 times quickly. Bulb flashes when reset.
- Won't connect to SmartThings: Disable "Secure mode" on hub. Keep hub 3+ feet from router.
- Missed pairing window: Reset bulb and try again. Only have 3 minutes to pair after power on.
- Colors look wrong: Calibrate in app if available. Some colors vary between bulb models.
- Don't use with dimmers: Sengled smart bulbs are not compatible with dimmer switches.
Was this guide helpful?