How to Set Up Your Zooz ZEN34 Z-Wave Remote Switch

What You'll Need

• Zooz ZEN34 Z-Wave Plus Remote Switch
• Z-Wave hub (SmartThings, Hubitat, Home Assistant, etc.)
• Z-Wave network already configured
• CR2032 battery (included)

Step-by-Step Setup

1. Insert battery: Pull out battery tab or insert CR2032
2. Put hub in inclusion mode: Start Z-Wave device inclusion
3. Press ZEN34 button: Press the upper paddle 3 times quickly
4. Wait for inclusion: Hub will discover the remote
5. Configure associations: Associate with Z-Wave devices for direct control
6. Set up scenes: Configure scene actions for each button tap
7. Mount: Use wall plate or adhesive

Key Features

• Paddle design: Looks like standard Decora switch
• Multiple taps: Single, double, triple, quadruple, and quintuple taps
• Hold actions: Hold up or down for dimming
• Direct association: Control Z-Wave devices without hub processing
• Scene capable: Triggers Z-Wave central scenes
• S2 security: Supports latest Z-Wave security

Troubleshooting

• Won't include: Exclude first (press lower paddle 3x), then include
• Multi-tap not working: Hub must support Z-Wave Central Scene
• Association setup: Use Z-Wave association groups for direct control
• LED behavior: Configurable via Z-Wave parameters
• Factory reset: Press and hold both paddles for 10+ seconds