What You'll Need

Zooz ZSE44 XS Sensor
Z-Wave hub or controller
CR2032 battery (included)
Smartphone with your hub's app

Step 1: Insert the Battery

Open the sensor case and insert the included CR2032 battery with the positive side facing up. The LED will flash to confirm power.

Step 2: Add to Z-Wave Network

Put your Z-Wave hub into inclusion/pairing mode. Click the button on the sensor 3 times quickly. Wait for your hub to confirm the device has been added.

Step 3: Position the Sensor

Place the sensor in the location you want to monitor. The compact XS size allows placement in tight spaces. Avoid direct sunlight, heat sources, or drafty locations for accurate readings.

Step 4: Configure in Your Hub

Access the sensor settings in your hub's app. Configure reporting intervals and thresholds based on your automation needs.

Features

Ultra Compact: XS size fits anywhere
Temperature & Humidity: Dual environmental monitoring
Z-Wave Plus: Extended range and improved battery life
S2 Security: Encrypted communication
Long Battery: Up to 2 years on single CR2032

Troubleshooting

Won't pair: Move closer to hub; try exclusion then re-include
Inaccurate readings: Allow 15 minutes to acclimate; check placement
Not reporting: Check battery; verify hub connection
Factory reset: Click button 3x, then hold for 10 seconds