Skip to main content
What You'll Need
- Dreame X40 Ultra robot vacuum and mop
- Auto-empty station with water tanks (included)
- Dreamehome app on smartphone
- 2.4GHz WiFi network
- Clean water and optional cleaning solution
Step-by-Step Setup
- Assemble station: Place base unit against wall. Attach dust bag, clean water tank, and dirty water tank.
- Fill clean water: Remove clean tank, fill to MAX line, replace in station.
- Connect power: Plug in station. Lights indicate it's powered on.
- Unpack robot: Remove all protective materials. Ensure side brushes are attached.
- Attach mop pads: Press the two mop pads onto the mounting plates on the robot bottom.
- Dock robot: Place on station. Voice prompt confirms connection.
- Get Dreamehome app: Download and sign up for an account.
- Add device: Tap "+" and select your Dreame model. The robot's WiFi light flashes.
- Connect network: Enter your 2.4GHz WiFi password. Wait for successful connection.
- Map and customize: Run mapping clean, then set room names and cleaning preferences.
Key Features
- 12,000Pa suction: Exceptional suction power for embedded dirt
- MopExtend technology: Mop arm extends along edges and into corners
- 40mm mop lift: Highest lift in class for thick carpets
- AI obstacle recognition: Avoids cables, shoes, pet waste, and more
- Hot water mop wash: Station cleans mops with heated water
- Self-cleaning station: Auto-empties dust, washes mops, dries mops, refills water
Troubleshooting
- Mop extension not working: Ensure latest firmware. Check for debris blocking extension arm.
- Not emptying dust: Check dust bag is properly installed. Replace if bag indicator shows full.
- Water tank errors: Ensure tanks are clicked fully into place. Clean tank sensors.
- WiFi disconnects: Place router closer. Avoid areas with high WiFi interference.
- Poor edge cleaning: Enable edge cleaning mode in app. Ensure side brush isn't worn.