How to Set Up Dreame X50 Ultra

Beginner 20-45 minutes

What You'll Need

  • Dreame X50 Ultra robot vacuum and mop
  • Auto-maintenance station (included)
  • Dreamehome app on smartphone
  • 2.4GHz WiFi network
  • Clean water

Step-by-Step Setup

  1. Assemble station: Place against wall. Install dust bag, water tanks.
  2. Fill clean water: Fill clean tank to MAX line.
  3. Connect power: Plug in station. Lights confirm power.
  4. Unpack robot: Remove all protective materials.
  5. Install mop pads: Attach mop pads to robot bottom.
  6. Dock robot: Place on station for initial charge.
  7. Download Dreamehome app: Install and create account.
  8. Add device: Tap "+" and select Dreame X50 Ultra.
  9. WiFi setup: Follow prompts to connect to 2.4GHz network.
  10. Map home: Run mapping clean, then customize zones.

Key Features

  • 20,000Pa suction: Extreme cleaning power
  • ProLeap system: Climbs obstacles up to 6cm
  • MopExtend RoboSwing: Mops extend beyond robot body for edge cleaning
  • 50mm mop lift: Highest lift for thick carpets
  • Hot water wash: Cleans mops with heated water
  • AI recognition: Identifies 200+ object types

Troubleshooting

  • ProLeap not working: Ensure obstacles are under 6cm. Update firmware.
  • Mop extension issues: Check for debris blocking mechanism.
  • Not climbing thresholds: Some surfaces may be too slippery. Add threshold ramp if needed.
  • Water streaks: Reduce water flow in app. Clean mop pads.
  • WiFi issues: Use 2.4GHz only. Factory reset if needed.