What You'll Need
- Netro Sprite controller
- Existing sprinkler wiring
- Screwdriver
- Netro app
- 2.4GHz WiFi network
Step-by-Step Setup
- Turn off power: Switch off the circuit breaker for your sprinkler system.
- Document wiring: Photograph your existing controller's wire connections.
- Mount Netro Sprite: Install in an indoor location or weather-protected area.
- Connect zone wires: Attach each zone wire to numbered terminals (1-12). Connect common to C.
- Connect power: Plug in the power adapter.
- Download Netro app: Install from App Store or Google Play.
- Create account: Sign up for free—no subscription needed.
- Add controller: Tap "+" and follow the on-screen instructions to pair.
- Connect WiFi: Enter your 2.4GHz network credentials when prompted.
- Set up zones: Configure each zone with plant type, sprinkler type, and soil conditions.
- Enable Whisperer AI: Netro's AI creates and adjusts schedules based on weather.
- Optional: Add weather station: Connect a personal weather station for hyperlocal data.
Key Features
- 12 zones
- Whisperer AI for intelligent scheduling
- No subscription required—ever
- Personal weather station support
- EPA WaterSense certified
- Alexa and Google Home compatible
- Up to 50% water savings
Troubleshooting
- AI scheduling too aggressive: Manually adjust zone settings or set restrictions in the app.
- WiFi disconnects: Check signal strength. Netro has limited range compared to some competitors.
- Zone not responding: Verify wire is secure. Test with manual run.
- Weather data inaccurate: Consider adding a personal weather station for better local data.
Was this guide helpful?