What You'll Need
- Yardian Pro controller
- Existing sprinkler wiring
- Screwdriver
- Yardian app
- 2.4GHz WiFi network
- microSD card (optional, for local recording)
Step-by-Step Setup
- Turn off power: Disable the circuit breaker for your existing sprinkler system.
- Remove old controller: Document and disconnect existing wiring.
- Mount Yardian Pro: Install outdoors—the unit is IP65 rated. Mount with camera facing your yard.
- Connect zone wires: Attach zone wires to terminals 1-12. Connect common wire to C.
- Connect power: Hardwire to 24VAC or use the included transformer.
- Insert microSD (optional): For local video storage, insert a microSD card.
- Download Yardian app: Install on your smartphone.
- Create account: Sign up in the app.
- Add device: Tap "+" and follow instructions to connect Yardian Pro.
- Connect to WiFi: Enter your 2.4GHz credentials.
- Configure camera: Adjust camera angle and set up motion detection zones.
- Set up irrigation zones: Name zones and configure plant types, soil, and exposure.
- Create schedule: Use smart scheduling or set manual programs.
Key Features
- 12 zones
- Built-in 1080p HD security camera
- Motion detection with alerts
- Night vision
- Two-way audio
- AI-based watering optimization
- Alexa and Google Home compatible
Troubleshooting
- Camera not showing video: Check WiFi bandwidth. Camera requires stable connection.
- Motion alerts too frequent: Adjust motion sensitivity and detection zones in app.
- Zone not activating: Verify wire connection. Test manually from app.
- Night vision poor: Clean camera lens. Ensure IR LEDs are not obstructed.
Was this guide helpful?