How to Set Up Roborock Qrevo Master

Beginner 20-45 minutes

What You'll Need

  • Roborock Qrevo Master robot vacuum and mop
  • Multifunctional dock (included)
  • Roborock app on smartphone
  • 2.4GHz WiFi network
  • Water for clean tank

Step-by-Step Setup

  1. Position dock: Place against wall on hard floor. Leave 0.5m on sides and 1.5m in front.
  2. Prepare water tanks: Fill clean water tank, ensure dirty water tank is empty.
  3. Connect dock: Plug in power cord. Dock lights up when ready.
  4. Prepare robot: Remove packaging, attach side brush if needed.
  5. Attach mop pads: Press rotary mop pads onto the robot's mounting points.
  6. Dock robot: Place on station. Robot announces startup.
  7. Get Roborock app: Download and create account.
  8. Add device: Tap "+" and select "Qrevo Master." Hold dock buttons to enter pairing.
  9. Connect WiFi: Follow app prompts to connect to your 2.4GHz network.
  10. Map home: Start quick mapping. Customize rooms and zones after completion.

Key Features

  • 10,000Pa HyperForce suction: Deep carpet cleaning power
  • Dual rotary mops: 200 RPM spinning pads for scrubbing
  • FlexiArm side brush: Extends to clean edges and corners
  • Hot water mop washing: 60°C water for hygienic mop cleaning
  • Auto-lift mops: Raises mops for carpet protection
  • Hot air drying: Prevents mold and mildew on mops

Troubleshooting

  • Mops not spinning: Check mop pads are correctly attached. Restart robot.
  • Edge brush not extending: Update firmware. Check for obstructions in mechanism.
  • Dirty water tank full alert: Empty and rinse dirty tank. Check float sensor isn't stuck.
  • Not returning to dock: Clean dock sensors. Ensure dock area is clear and visible.
  • WiFi issues: Must use 2.4GHz. Factory reset if persistent issues.