Skip to main content
What You'll Need
- Wyze Sprinkler Controller (8-Zone)
- Existing sprinkler system
- Wyze app on smartphone
- WiFi network (2.4GHz)
- Wire strippers and screwdriver
Step-by-Step Setup
- Turn off power: Shut off breaker to existing sprinkler controller.
- Photo existing setup: Document current wiring configuration.
- Remove old controller: Disconnect wires and remove from wall.
- Mount Wyze controller: Use included mounting hardware. Indoor installation recommended.
- Connect zone wires: Attach each zone wire to terminals 1-8.
- Connect common wire: Connect to C terminal.
- Connect power: Plug in included power adapter.
- Open Wyze app: Sign in or create a Wyze account.
- Add device: Tap "+" then "Sprinkler Controller."
- Put in pairing mode: Press and hold Setup button until light flashes.
- Connect WiFi: Select your 2.4GHz network and enter password.
- Configure zones: Name zones and set sprinkler head types.
Key Features
- Weather-based watering: Skips watering before/after rain
- Smart scheduling: Suggests optimal watering times
- Budget friendly: Lower cost than many competitors
- Quick run: Easily run zones manually from app
- Alexa/Google compatible: Voice control supported
- Water history: Track watering duration and frequency
Troubleshooting
- Not connecting to WiFi: Only works with 2.4GHz. Check network band.
- Zones not working: Verify wire connections. Test with manual run.
- App shows offline: Power cycle the controller. Check WiFi stability.
- Weather skip not working: Enable weather intelligence in zone settings.
- Schedule missed: Check phone notifications are enabled. Verify schedule is active.