How to Set Up Your Aeotec NanoMote Quad

Intermediate 5-10 minutes

What You'll Need

  • Aeotec NanoMote Quad
  • Z-Wave hub (SmartThings, Hubitat, Home Assistant, etc.)
  • Z-Wave network configured
  • CR2450 battery (included)

Step-by-Step Setup

  1. Insert battery: Open the NanoMote and insert CR2450 battery
  2. Put hub in inclusion mode: Start Z-Wave device pairing
  3. Include NanoMote: Press any button once
  4. S2 authentication: If prompted, enter DSK code from device label
  5. Wait for inclusion: Hub will add the remote
  6. Configure buttons: Set up actions for each of the 4 buttons
  7. Create associations: Associate with Z-Wave devices for direct control
  8. Attach to surface: Use included mount or carry as remote

Key Features

  • 4 buttons: Compact 4-button controller
  • Multiple taps: Single, double, and hold per button
  • Portable design: Small form factor, fits in pocket
  • Z-Wave Plus: Extended range and reliability
  • S2 security: Supports latest Z-Wave security
  • Central Scene: Full scene capability

Troubleshooting

  • Won't include: Exclude first by pressing button during exclusion mode
  • Multi-tap not working: Ensure hub supports Z-Wave Central Scene
  • Short range: Battery-powered devices have reduced range. Include closer to hub
  • Button unresponsive: Check battery level
  • Factory reset: Press and hold any button for 20+ seconds