How to Set Up Your MOES Zigbee Scene Switch

Beginner 5-10 minutes

What You'll Need

  • MOES Zigbee Scene Switch
  • Tuya Zigbee gateway or compatible Zigbee hub
  • Tuya Smart or Smart Life app (iOS/Android)
  • CR2450 battery (included)

Step-by-Step Setup

  1. Insert battery: Open back cover, insert CR2450
  2. Open Smart Life app: Navigate to your Zigbee gateway
  3. Add sub-device: Tap gateway → "Add Sub-device"
  4. Enter pairing mode: Hold any button for 5 seconds until LED flashes
  5. Discover switch: Wait for it to appear in app
  6. Assign buttons: Configure what each button does
  7. Link to scenes: Create automations for button presses
  8. Mount: Use adhesive for wall mounting

Key Features

  • Multiple button options: Available in 1, 2, 3, or 4 button versions
  • Zigbee connectivity: Reliable, low-power operation
  • Tuya compatible: Works with Tuya ecosystem
  • Scene control: Each button can trigger different scenes
  • Battery powered: No wiring needed
  • Works with other hubs: Compatible with Home Assistant, Hubitat

Troubleshooting

  • Not all buttons work: Each button needs an automation configured
  • Pairing fails: Stay close to gateway. Reset and try again
  • Home Assistant: Use ZHA or Zigbee2MQTT for integration
  • Button presses ignored: Check if button is still paired to gateway
  • Factory reset: Hold first button 10+ seconds until rapid flashing