How to Set Up Your Tailwind iQ3 Smart Garage Controller

What You'll Need

• Tailwind iQ3 Smart Garage Controller
• Tailwind app (iOS/Android)
• 2.4GHz Wi-Fi network
• Tailwind account
• Existing garage door opener

Step-by-Step Setup

1. Mount the controller: Install near garage door opener
2. Wire connections: Connect to opener's button terminals
3. Install door sensor: Mount included sensor on door
4. Power on: Connect USB power
5. Download Tailwind app: Create account
6. Add device: Follow in-app setup wizard
7. Connect to Wi-Fi: Enter network credentials
8. Configure doors: Set up each door (supports up to 3)
9. Enable auto features: Set up auto-open/close based on location

Key Features

• Multi-door support: Controls up to 3 garage doors
• Auto-open: Opens when you arrive home (GPS-based)
• Auto-close: Closes when you leave or after timeout
• Vehicle detection: Optional vehicle sensor for presence
• HomeKit compatible: Works with Apple Home
• Local control: Works even without internet

Troubleshooting

• Auto-open not working: Check location permissions in app
• Door sensor issues: Verify magnet alignment
• Multiple doors: Each door needs its own sensor
• HomeKit setup: Add via Tailwind app, then HomeKit code appears
• Factory reset: Hold reset button for 10+ seconds