How to Set Up Your Third Reality Zigbee Smart Button

What You'll Need

• Third Reality Zigbee Smart Button
• Zigbee hub (SmartThings, Amazon Echo with Zigbee, Hubitat, Home Assistant)
• Hub's app for configuration
• CR2450 battery (included)

Step-by-Step Setup

1. Install battery: Remove back cover, insert CR2450
2. Put hub in pairing mode: Enable Zigbee device discovery in your hub's app
3. Put button in pairing mode: Press and hold the button for 5-8 seconds until LED flashes
4. Wait for discovery: Button will appear in your hub
5. Name the button: Give it a descriptive name
6. Create automations: Set up what happens on press in your hub's app
7. Mount: Use included adhesive to stick on wall

Key Features

• Simple single button: One button for easy control
• Multiple press types: Single, double, and long press supported
• Works with major hubs: SmartThings, Echo Plus/Show, Hubitat, Home Assistant
• Zigbee 3.0: Universal Zigbee compatibility
• Compact: Small enough to place anywhere
• Affordable: Budget-friendly smart button option

Troubleshooting

• Won't pair: Ensure hub is in pairing mode. Move button closer during pairing
• Actions not triggering: Check automation setup in hub app
• Limited actions on some hubs: Not all hubs support double/long press
• Battery drain: Should last 2+ years with normal use
• Factory reset: Remove battery, hold button, reinsert battery while holding