How to Set Up Your Tuya Zigbee Scene Switch (4 Button)

What You'll Need

• Tuya Zigbee Scene Switch (4 Button)
• Tuya Zigbee hub or compatible Zigbee coordinator
• Tuya Smart app or Smart Life app (iOS/Android)
• CR2450 battery (usually included)

Step-by-Step Setup

1. Insert battery: Open back cover and install CR2450
2. Open Tuya/Smart Life app: Navigate to your Zigbee gateway
3. Add sub-device: Go to gateway → "Add sub-device"
4. Enter pairing mode: Press and hold any button for 5 seconds until LED flashes
5. Wait for discovery: Switch will appear as a scene switch
6. Configure buttons: Each button can trigger different scenes or devices
7. Create automations: Use Tuya automations for each button press
8. Mount: Use included adhesive or screws

Key Features

• 4 buttons: Trigger 4 different scenes or actions
• Multiple press types: Some models support single and long press per button
• Wall-mountable: Clean installation like a real switch
• Battery powered: No wiring required
• Tuya ecosystem: Works with all Tuya smart devices
• Scene control: Perfect for "Good Night," "Away," etc.

Troubleshooting

• Buttons not triggering: Create automations in Tuya app linking buttons to scenes
• Only works with Tuya: Needs Tuya Zigbee hub OR can pair with Home Assistant/Hubitat
• LED doesn't flash: Battery may be dead or inserted incorrectly
• Pairing timeout: Move closer to Zigbee hub during pairing
• Factory reset: Hold any button for 10+ seconds until LED flashes rapidly