What You'll Need

Step-by-Step Setup

Install batteries: Open the back cover and insert the included batteries. The LED will flash to confirm power.
Open SwitchBot app: Tap "+" and select "Motion Sensor" from the device list.
Activate pairing: Press and hold the button on the sensor for 3 seconds. The LED flashes rapidly when in pairing mode.
Select your hub: Choose your SwitchBot Hub to connect the motion sensor to your network.
Configure detection: Set the detection sensitivity (High, Medium, Low) based on your room size.
Enable Matter: Go to sensor settings, tap "Matter Setup," and choose your platform.
Add to platform: Scan the Matter QR code with your Apple Home, Google Home, or Alexa app.
Position the sensor: Mount at 1.2-2.4m height, angled slightly downward. Use the included stand or adhesive mount.

Wide detection range: 110° horizontal, 9m detection distance
Ambient light sensing: Trigger automations based on light levels
Adjustable sensitivity: Three levels to minimize false triggers
Pet immunity: Reduce false alerts from pets under 25kg when mounted correctly
Low battery alerts: Notifications when battery needs replacement
Activity history: View all motion events with timestamps

No motion detected: Check sensor orientation and ensure nothing is blocking the lens. Clean lens with soft cloth.
Too many false triggers: Lower sensitivity setting. Avoid pointing at windows, heating vents, or moving objects.
Sensor offline: Verify hub connection. Move sensor closer to hub if signal is weak.
Matter not responding: Restart the hub. Check that all devices are on the same network.
Battery life shorter than expected: High sensitivity and frequent motion events drain battery faster.

Was this guide helpful?